How Can We See Video From Sony Camera Recorder Hi8 With Only Tv

Solution

This section describes how to connect your camcorder to a TV.

To play back movies in loftier-definition quality, the camcorder can be continued with an optional HDMI cable or with the supplied component cablevision and supplied stereo video cable.

To play back movies in standard-definition, the camcorder can be connected with the supplied stereo cable.

Delight bank check the terminals of your TV and connect using the corresponding cables.

Caution

Be sure to turn off the camcorder and the TV when making the connections.
Please refer besides to the documentation supplied with the Tv set set up.

REFERENCE

It is recommended to connect the compact power adapter to the camcorder when y'all play back video on the Boob tube so that you tin can enjoy the video without worrying about battery power consumption.

1. Connecting to a high-definition idiot box equipped with an HDMI input concluding

Annotation

Nearly the HDMI connection

The HDMI ( High-Definition Multimedia Interface ) connection is a convenient all-digital connection using a single cable for both video and audio.

1. Connect the camcorder to the Boob tube.

one-1.Turn off the camcorder and the Boob tube.

1-ii. Employ the HDMI cable to connect the camcorder to the TV.

two. Turn on the camcorder and the TV.

On the TV, select the HDMI final to which you connected the camcorder as the video input.

Prepare the camcorder to the movie playback way.

3.Touch the desired scene to play it back.

The selected scenes will start playing.

Caution

The HDMI OUT concluding on the camcorder is for output only. Do not connect it to an HDMI output terminal on an external device, as this may damage the camcorder.
When the HDMI cable is used to connect the camcorder to the TV, video output from other terminals is not available.
Correct operation cannot exist guaranteed when connecting the camcorder to DVI monitors.
Some TVs may not output video properly. In that case, delight utilise the component cable and the stereo video cablevision to connect the camcorder to the TV.

ii. Connecting with the component cable (high-definition quality)

When connecting the camcorder and a Tv with the component cablevision, use the supplied stereo video cablevision to output the audio.

1. Before connecting the camcorder with a high-definition TV, brand the following setting on the camcorder.

Be sure the [AV/Headphones] setting is prepare to [AV].

2.Connect the camcorder to the TV.

two-1.Turn off the camcorder and the TV.

ii-2.Use the Component cable to connect the camcorder to the Television set.

To output audio, use the stereo cable to connect the camcorder to the TV (insert terminals other than the yellow i).

3. Turn on the camcorder and the Telly.

On the TV, select the component concluding to which yous connected the camcorder every bit the video input.

Set the camcorder to the movie playback mode.

4.Touch the desired scene to play it back.

The selected scenes volition start playing.

3. Connecting to audio/video input terminals (standard-definition)

1. Before connecting the camcorder with a TV, make the following settings on the camcorder.

Be sure the [AV/Headphones] setting is gear up to [AV].
Set the [Idiot box Type] according to the Telly.

2.Use the Stereo Video Cable to connect the camcorder to the TV.

three. Turn on the camcorder and the Television set.

On the TV, select the audio/video terminal to which yous continued the camcorder equally the video input.

Fix the camcorder to the moving picture playback way.

iv.Touch the desired scene to play it back.

The selected scenes will start playing.

Note

When yous play dorsum your sixteen:9 movies on standard TV sets with a four:3 attribute ratio, the Tv set set will switch automatically to widescreen manner if information technology is compatible with the Video ID-1 system. Otherwise, change the aspect ratio of the TV manually.

Source: https://sg.canon/en/support/8200740100

Posted by: finksalict.blogspot.com